Frequently Asked Questions

Want to Learn More About Wire Machine Systems?

Check out the questions our customers frequently have about our wire machine products. Reach out to our expert team to learn more!

What is a pointing machine?

A pointing machine reduces the end of a wire rod to a smaller diameter so it can be threaded through a drawing die to begin the drawing process. They are available in ferrous and non-ferrous configurations depending on the material being processed.

How do I choose between shot blasting and chemical pickling for surface preparation?

Shot blasting is a dry, mechanical process that removes scale without chemicals, making it more environmentally compliant and cost-effective at scale. Chemical pickling offers more uniform results on complex geometries but comes with increasing regulatory burden and disposal costs.

How do I know when my buncher bow needs to be replaced?

Visible delamination, cracking, unusual vibration at speed, or any sign of mounting slippage are all indicators that a bow should be taken out of service immediately.

What are the signs that my carbon brushes need to be replaced?

Excessive dusting, overheating, brush length worn below the minimum mark, or a damaged commutator film are all clear indicators that brushes need attention. Catching wear early protects the commutator surface, which is far more expensive to repair than the brushes themselves.

How do I maintain proper wire straightener alignment?

Check and adjust your straightener rollers regularly so they apply even, opposing pressure across the wire’s cross-section without inducing twist. Worn rollers and incorrect roller pressure are the most common causes of straightener misalignment.

Can I source replacement spare parts for European or Asian wire machinery?

Yes, Wire Machine Systems supplies spare parts for most European and Asian-made machines regardless of where the original equipment was purchased. This includes hard-to-find components for brands like Niehoff, SAMP, Eurodraw, Kinrei, Henrich, etc.

What shot media should I be using for my wire rod or bar descaling application?

The correct shot size, hardness, and shape depend on your material, required surface finish, and blast wheel configuration, but maintaining a healthy working mix is just as important as the initial media selection. Degraded or improperly mixed shot leads to inconsistent descaling, surface pitting, and accelerated wear on blast wheel components.

What is the difference between a standard flyer bow and a specialized design like an Aero Bow?

Specialized bow designs reduce aerodynamic drag and centrifugal stress, allowing higher operating speeds with less vibration and energy consumption than a standard bow. The upgrade typically pays for itself through reduced energy costs, longer service life, and the ability to run at speeds a conventional bow cannot safely achieve.

How do I evaluate whether my wire drawing operation should be relined with new equipment vs. rebuilt/refurbished?

If replacement parts are no longer available, energy consumption is significantly above modern benchmarks, or the control system cannot support current production demands, new equipment is usually the right call. When the machine’s core structure is sound, and parts remain accessible, a targeted rebuild often delivers modern performance at a fraction of the capital cost. Reach out to Wire Machine Systems for help determining the right action for your needs.

Who should I choose for buncher bows?

Wire Machine Systems manufactures and supplies specialized buncher bows, including Aero Bow which are engineered for higher speeds, longer service life, and compatibility with all bunching machines within the wire & cable industry. Our in-house expertise in bow technology makes us the go-to source for both replacement and performance-upgrade bows.

Who should I choose for carbon brushes?

Wire Machine Systems stocks and supplies carbon brushes for a wide range of wire and cable machinery, including hard-to-match grades for European and Asian equipment. Our ability to cross-reference OEM specifications means you get the right grade the first time, protecting your commutator and avoiding costly mismatches. We stock brushes for Niehoff, Samp, Lesmo, Kinrei, Henrich bunchers & drawing equipment.

Who should I choose for wire shot blasting equipment?

Wire Machine Systems represents proven shot blasting systems purpose-built for wire rod, continuous wire, coiled wire, and bar and tube applications. Our team can match the right machine configuration to your material and throughput requirements, eliminating the guesswork that comes with general-purpose blast equipment suppliers.

Who should I choose for wire straighteners?

Wire Machine Systems offers industry-leading precision wire straighteners and guides designed for consistent alignment across a wide range of wire diameters and materials. Whether you need a standalone straightener or a fully integrated straighten-and-cut solution, we have the equipment and application knowledge to spec the right system.

Who should I choose for spare parts for my wire or bar drawing machinery?

Wire Machine Systems supplies spare parts for most European and Asian wire, cable, bar, and tube machines, regardless of brand or where the equipment was originally purchased. Our broad inventory and sourcing capabilities make us the most practical single point of contact for keeping aging or imported machinery running. Contact our dedicated team today to learn more!

Reach Out to Learn More

"*" indicates required fields

Name*

Address

6032 Highview Dr,
Fort Wayne, IN 46818